How To Clean Your Dishwasher Filter In 2023

2 min read

How To Clean Your Dishwasher Filter In 2023

The Importance of Cleaning Your Dishwasher Filter

If you own a dishwasher, you know how convenient it is to have clean, sparkling dishes at the push of a button. However, over time, your dishwasher’s performance may start to decline, and you may notice that your dishes aren’t coming out as clean as they used to. One common culprit for this is a clogged or dirty dishwasher filter.

What Does the Dishwasher Filter Do?

The dishwasher filter is responsible for trapping food particles, debris, and other contaminants that may be present in your dishwasher. It prevents these particles from clogging the pump and spray arms, ensuring that water can flow freely and clean your dishes effectively.

How Often Should You Clean Your Dishwasher Filter?

It is recommended to clean your dishwasher filter at least once every three months to maintain optimal performance. However, if you notice that your dishes aren’t getting clean or there is a foul odor coming from your dishwasher, it may be a sign that your filter needs to be cleaned more frequently.

Step-by-Step Guide to Clean Your Dishwasher Filter

Step 1: Turn off the Power

Before you start cleaning your dishwasher filter, it’s important to turn off the power to the dishwasher. This will prevent any accidents or injuries while you’re working on the filter.

Step 2: Locate the Filter

The location of the dishwasher filter may vary depending on the make and model of your dishwasher. However, in most dishwashers, the filter is located at the bottom of the dishwasher, near the spray arm. It is usually a cylindrical or flat mesh screen.

Step 3: Remove the Filter

Once you’ve located the filter, carefully remove it from the dishwasher. It may be held in place by clips or screws. Refer to your dishwasher’s manual for specific instructions on how to remove the filter.

Step 4: Rinse the Filter

Take the filter to the sink and rinse it under running water to remove any loose debris. Use a soft brush or toothbrush to gently scrub the filter and remove any stubborn particles.

Step 5: Soak the Filter

Fill a bowl or sink with warm water and add a small amount of dish soap. Place the filter in the soapy water and let it soak for about 15 minutes. This will help to loosen any grease or grime that may be stuck to the filter.

Step 6: Scrub the Filter

After soaking, take the filter out of the soapy water and use a brush or toothbrush to scrub it thoroughly. Pay special attention to any areas with stubborn residue. Rinse the filter under running water to remove any soap residue.

Step 7: Clean the Filter Housing

While the filter is soaking, use a damp cloth or sponge to clean the filter housing in the dishwasher. Remove any debris or buildup that may be present.

Step 8: Reinstall the Filter

Once the filter and filter housing are clean, carefully reinstall the filter back into the dishwasher. Make sure it is securely in place and properly aligned.

Step 9: Test Your Dishwasher

Turn the power back on to your dishwasher and run a test cycle to ensure that everything is working properly. You should notice improved performance and cleaner dishes after cleaning the filter.

Conclusion

Cleaning your dishwasher filter is an essential maintenance task that should not be overlooked. By following the step-by-step guide outlined above, you can ensure that your dishwasher continues to perform at its best, providing you with spotless dishes every time.